At present, many people are concerned about the products brought about by social progress, but many people still lack understanding of equipment such as pipe cutting machines. For this reason, today we will analyze common sense issues in this regard.

??1. Working principle of pipe cutting machine

The principle of ?? is that through the mutual cooperation of computer and hydraulic pressure, the electrical system controls the movement direction of the oil circuit of the hydraulic system, and pushes the carriage to move back and forth in a straight line. The microcomputer will walk according to the user's self-programmed tool path. During the round-trip motion, the signal detected from the carriage limit is used as the basis to control and change the oil path movement, so as to achieve the expected tool path. When buying a pipe cutting machine, you should also understand its use: this machine tool is widely used in the automatic pipe opening of stainless steel pipe cutting and chamfering in the handle industry. It can be placed stainless steel pipes and seamless steel pipes with a length of ∮ 25 or less and a length of 6 meters. For automatic feeding, cutting and chamfering processes, one person manages multiple machines, reducing labor intensity and saving personnel.

??2. Working principle

??Automatic pipe cutting machine can automatically clamp, feed, feed, set size, stop at a fixed number and work measurement and other functions. The main circuit of the machine adopts PLC programmable logic controller to work. Automatic feeding, clamping and cutting system, accurate and fast feeding, can cut 10-50 times per minute. The counter can set the number of cutting materials, and it will automatically stop after cutting materials. There is no need for manual operation at all, higher mechatronics, and even one person can operate multiple units, reducing the number of employees. The total counter counts the workload records for a day. The total pressure, front, back and pressure can be adjusted steplessly to ensure that the workpiece is not clamped and deformed. The servo pipe cutting machine is used, and the cutting length accuracy is guaranteed to be within plus or minus 0.05mm (the error is mainly generated on the steel pipe and the tool). ), the cut is glossy without burrs.

??3. Operating procedures

??1. Inspection before starting up

??1.1 Check whether the saw blade is in good condition, and replace it if there is any chip or crack.

??1.2 According to the specifications of the high-pressure hose, replace the corresponding positioning pins and guide sleeves.

??2. Operation steps

??2.1 Turn on the power and start the motor.

??2.2 Insert the high-pressure hose to be cut into the replaced guide sleeve, pull the knife handle to drive the hose into the saw blade, then the hose will be cut off. When the slide plate is reset, it will be pulled back to its original position by two tension springs.

?? The above is about some working principles of the pipe cutting machine. I don’t know what you think about it. You are welcome to leave a message. Let’s learn common sense issues in this area together.